Colorline - Eagle FISHSTRIKE 1000C Installation And Operation Instructions Manual

If you do experiment with chart speed, remember to reset it to
maximum when you resume trolling or moving across the water at
higher speed. To change chart speed:
1. From the Sonar Page, press
2. The Chart Speed Control Bar appears. Press ↓ to decrease chart
speed; press ↑ to increase chart speed.
3. When it's set at the desired level, press
ColorLine
ColorLine lets you distinguish between strong and weak echoes. It
"paints" a brighter color on targets that return a stronger signal. This
allows you to tell the difference between a hard and soft bottom. For
example, a soft, muddy or weedy bottom returns a weaker signal, which
is shown with a narrow, colored line (dark blue tinged with red or a
little yellow.) Since fish are among the weakest echoes, they show up
mostly as blue arches. A hard bottom or other relatively hard target
returns a strong signal displayed as a wide, brightly colored line
(reddish yellow to bright yellow.)
If you have two signals of equal size, one with red to yellow color and
the other without, then the target with brighter color (yellow) is the
stronger signal. This helps distinguish weeds from trees on the bottom,
or fish from structure.
ColorLine is adjustable. Experiment with your unit to find the
ColorLine setting that's best for you.
Sonar Page menu with ColorLine command selected (left);.
To adjust the ColorLine level:
1. From the Sonar Page, press
2. The ColorLine Control Bar appears. Press ↓ to decrease ColorLine;
press ↑ to increase Colorline.
3. When it's set at the desired level, press
MENU
The ColorLine control bar (right).
MENU
|↓ to
C S
HART
.
EXIT
|↓ to
C
OLORLINE
.
EXIT
60
| .
ENT
PEED
| .
ENT