Transfer Custom Maps And Gps Data Files; Custom Maps - Eagle FISHSTRIKE 1000C Installation And Operation Instructions Manual

Present
position
arrow
Trail point
Navigate trail, map views: the driver (left) is northbound heading
straight toward trail point 6. The northbound driver (right) has
reached point 6 and has turned west to follow trail.
1. Press
MENU
2. Press ↓ to enter the Saved Trail list, then use ↑ or ↓ to select the
desired Trail Name|
3. Press → to
4. Press ↓ to
begins showing reverse navigation information along the trail.
NOTE:
If you are already located at or near the end of your trail, the
arrival alarm will go off as soon as you hit Enter. Just press
clear the alarm and proceed.
5. Now, begin moving and follow your unit.
6. When you reach your destination, be sure to cancel your navigation.
Press |
MENU MENU
←
sure, press |

Transfer Custom Maps and GPS Data Files

Custom Maps:

Custom maps work only from the MMC card or SDC card. When a card
containing a Custom Map File is loaded into the unit, it automatically
loads the map into memory when the unit is turned on.
Instructions for copying Custom Map Files to an MMC are contained in
the instruction manual for your MMC card reader and MapCreate 6
software. For instructions on inserting a MMC into the Unit, see Sec. 2,
Installation/Accessories.
| |↓ to
MENU M
.
ENT
|↓ to
D T
ELETE RAIL
|→ to
N
AVIGATE
↓
| to
C
ANCEL
.
ENT
North
Magenta
trail line
| .
T ENT
Y RAILS
|
N ENT
AVIGATE
| |← to
R ENT
EVERSE
|
N
AVIGATION
119
.
|
N
AVIGATE
. The unit asks if you're
ENT
. The unit
ENT
to
EXIT