Selecting A Waypoint; Set A Waypoint By Average Position; Set A Waypoint By Projecting A Position - Eagle FishElite 320 Installation And Operation Instructions Manual

Waypoint Symbol
To edit waypoint symbol:
1. Press
WPT
|
W ENT
AYPOINT
2. Use arrow keys to select desired symbol and press
the previous page, press
Waypoint Position
To edit waypoint position:
1. Press
WPT
|
W ENT
AYPOINT
2. Latitude: press → to
character, then press → to the next character and repeat until the lati-
tude is correct. Press
3. Longitude: press ↓ to
character, then press → to the next character and repeat until the lon-
gitude is correct. Press
4. When latitude and longitude are correct, return to the previous page:
press |
EXIT EXIT

Selecting a Waypoint

To select a waypoint on the map (for navigating to, for editing, etc.,) use
the arrow keys and center the cursor over the waypoint. A highlighted
halo will appear around the waypoint.

Set a Waypoint by Average Position

This feature sets a waypoint at the current position after taking several
position readings and averaging them. This boosts waypoint position
accuracy by helping to eliminate errors caused by atmospheric condi-
tions and other factors.
1. Press |→ to
WPT
2. Press ↓ or ↑ to
3. Wait while the unit takes points to average for the position. (The greater
the number of points, the greater the accuracy.) When the desired number
of points accumulates, press
4. The Edit Waypoint menu appears. You can simply save the waypoint
by pressing
EXIT

Set a Waypoint by Projecting a Position

This feature sets a waypoint at a point located a specific distance and
bearing from a reference position. The reference position can be se-
| | |
ENT ENT ENT
|↓ to
C S
HOOSE
EXIT
| | |
ENT ENT ENT
.
L
ATITUDE
.
EXIT
L
ONGITUDE
EXIT
| | .
EXIT EXIT
S
UBCATEGORY
A P
VERAGE OSITION
| or you can edit the waypoint.
EXIT
|↓ to waypoint name|
| .
ENT
YMBOL
| | |
EXIT EXIT
|↓ to waypoint name|
. Press ↑ or ↓ to change the first
|
ENT
. Press ↑ or ↓ to change the first
|
ENT
.
column|↓ to
|press → to
|
ENT
to create and save the waypoint.
ENT
132
ENT
.
EXIT
| .
N ENT
EW
C
REATE
|↓ to
ENT E
DIT
. To return to
|↓ to
ENT E
DIT
| .
ENT