Split Frequency Sonar Chart (320Df Only) - Eagle FishElite 320 Installation And Operation Instructions Manual

Split Frequency Sonar Chart
(SeaCharter 320DF only)
This page shows sonar data from the 50 kHz transducer element on the
left side of the screen and data from the 200 kHz transducer on the
right side. All other functions and features are the same as the Full
Chart page.
50 kHz view at left and 200 kHz view at right.
You can adjust the sensitivity in each window.
To adjust sensitivity in auto mode:
1. Press
MENU
2. The unit asks which you wish to adjust. Press ← or→ to select the
one you want |
3. The Sensitivity Control Bar appears. Press ↓ to decrease sensitivity;
press ↑ to increase sensitivity. When it's set at the desired level, press
. (When you reach the maximum or minimum limit, a tone sounds.)
EXIT
The Split Frequency Sonar Chart page allows you to adjust
Split Frequency Sonar Chart page, with
| .
ENT
.
ENT
sensitivity separately for each window.
79