Depth Cursor; Depth Range - Automatic - Eagle FishElite 320 Installation And Operation Instructions Manual

1. From the Sonar Page, press
2. The Chart Speed Control Bar appears. Press ↓ to decrease chart
speed; press ↑ to increase chart speed.
3. When it's set at the desired level, press

Depth Cursor

The depth cursor consists of a horizontal line with a digital depth box
on the right side. The numbers inside the box show the depth of the
cursor.
At left, Sonar Page menu with Depth Cursor command selected. At
right, sonar chart with the depth cursor active. The line indicates the
The cursor can be moved to any location on the screen, letting you pin-
point the depth of a target.
1. From the Sonar Page, press
2. The depth cursor appears. Press ↓ to lower the cursor line; press ↑ to
raise the cursor line.
3. To clear the depth cursor, press

Depth Range - Automatic

When turned on for the first time, the bottom signal is automatically
placed in the lower half of the screen. This is called Auto Ranging and
is part of the automatic function. However, depending upon the bottom
depth and the current range, you can change the range to a different
depth. To do this:
1. From the Sonar Page, press
MENU
large fish is 34.64 feet deep.
MENU
EXIT
MENU
60
|↓ to
C S
HART PEED
.
EXIT
Cursor line
|↓ to
D C
EPTH URSOR
.
|↓ to
D R
EPTH ANGE
| .
ENT
Depth box
| .
ENT
| .
ENT