Edit A Waypoint (Name, Symbol, Position); Selecting A Waypoint - Eagle 500C Installation And Operation Instructions Manual

Edit a Waypoint
Waypoint Name
To edit waypoint name:
1. Press |↑ to
WPT
waypoint from the list by using ↑ or ↓ to select first character then
press → to choose the next character. After the desired waypoint is
highlighted in the list, press
screen.
2. Use → to select
Modify the name by pressing ↑ or ↓ and →. Once the new
|
ENT ENT.
name is set press
ous page display.
Waypoint Symbol
To edit waypoint symbol:
1. Press |↑ to
WPT
from the list then press
bottom menu. Then press|
2. Use arrow keys to select desired symbol and press
the previous page, press
Waypoint Position
To edit waypoint position:
1. Press
WPT
steps above to access waypoint information screen. Select
press | .
ENT
2. Latitude: press ↓ to
character, then press → to the next character and repeat until the lati-
tude is correct. Press
3. Longitude: press ↓ to
character, then press → to the next character and repeat until the lon-
gitude is correct. Press
4. When latitude and longitude are correct, return to the previous page:
press |
EXIT EXIT

Selecting a Waypoint

To select a waypoint on the map (for navigating to, for editing, etc.,) use
the arrow keys and center the cursor over the waypoint. A highlighted
halo will appear around the waypoint.
M W
Y AYPOINTS
E DIT W
|
ENT EXIT
M W
Y AYPOINTS
ENT
ENT
EXIT
|↑ to
M W
Y AYPOINTS
L
ATITUDE
.
EXIT
L
ONGITUDE
EXIT
| | .
EXIT EXIT
| |↓| to name|
ENT
| to access waypoint information
ENT ENT
from the bottom menu, then press
AYPOINT
| |
EXIT EXIT
| |↓ to name|
ENT
|. Use → to select
|
ENT
|↓ to
A
LTITUDE
| | |
EXIT EXIT
| |↓ to name|
ENT
. Press ↑ or ↓ to change the first
|
ENT
. Press ↑ or ↓ to change the first
|
ENT
.
137
|. Choose desired
ENT
| to return to the previ-
EXIT
. Select waypoint
ENT
E
DIT
|→ to
C
HOOSE
ENT
.
EXIT
ENT
from
W
AYPOINT
|
S ENT
YMBOL
. To return to
|. Then repeat
E W
DIT AYPOINT
.
,