Eagle FishElite 320 Installation And Operation Instructions Manual page 127

NOTE:
To load a Navionics
GPS Data files:
GPS Data Files contain waypoints, routes, trails and event marker
icons. Instructions for copying GPS Data Files between your computer
and an MMC are contained in the instruction manual for your MMC
card reader and MapCreate 6 software.
GPS data automatically recorded in the unit's internal memory must be
saved to the MMC (as a GPS Data File) in order to store it on your per-
sonal computer. GPS Data Files stored on an MMC must be copied from
the card to the unit's internal memory before the unit can read them.
Here's how:
1. Insert the MMC into your unit. Press
| |↓ to
S ENT
ETUP
The Transfer My Data submenu asks if you want to save data to the
MMC or load data from the MMC into the unit's memory.
2. The Transfer My Data menu includes a message which tells you if an
MMC is present or not. If no MMC is present, you must first insert a
card into the unit in order to activate the Load or Save commands.
To transfer data from the unit to the MMC: press
To transfer data from the MMC to the unit: press → to
3. Saving to MMC: To accept the default name "Data" for the GPS
Data File, press ↓ to
shown in the following figures), press
Press ↑ or ↓ to change the first character, then press → to the next
character and repeat until the name is correct. Then, press
|
S D ENT
AVE ATA
The unit will display first a progress then a completion message when
the data transfer is finished. To return to the Page view, repeatedly
press .
EXIT

chart, see Sec. 8 for the entry Navionics Charts.
T M
RANSFER Y
S D
AVE
.
| and the screen below appears.
D ENT
ATA
| . If you wish to rename the file (as
ENT
ATA
ENT
119
|
MENU MENU
ENT
to activate the selection box.
|↓ to
S
YSTEM
(for .)
S
AVE
| .
L ENT
OAD
|↓ to
ENT