Table of Contents
Advertisement
Track or compass heading indicator
Trail
waypoint
symbol
Course
line made
from trail
Navigate trail, navigation page (compass rose) views: at left, driver is
northbound heading straight toward trail point 6; bearing arrow
shows the trail point is due north (straight ahead.) At right, driver has
reached trail point 6 and must turn west to follow the trail. Arrival
alarm goes off and bearing arrow swings around to say turn left (west),
toward the next waypoint, trail point 7. The unit now shows naviga-
tion information to point 7, which is 1.99 miles away.
Navigate a Back Trail (backtrack, or reverse)
1. Press
MENU
2. Press ↓|↓ to enter the Saved Trail list, then use ↑ or ↓ to select the
desired Trail Name|
3. Press → to
4. Press ↓ to
begins showing navigation information along the trail, in reverse.
NOTE:
If you are already located at or near the end of your trail, the arri-
val alarm will go off as soon as you hit Enter. Just press
clear the alarm and proceed.
5. Now, begin moving and follow your unit.
6. When you reach your destination, be sure to cancel your navigation:
press
|
MENU
MENU
sure; press ← |
Transfer Custom Maps and GPS Data Files
Custom Maps:
Custom maps work only from the MMC card or SDC card. When a card
containing a Custom Map File is loaded into the unit, the unit auto-
matically loads the map into memory when the unit is turned on.
Instructions for copying Custom Map Files to an MMC are contained in
the instruction manual for your MMC card reader and MapCreate 6
software. For instructions on inserting an MMC into the unit, see Sec-
tion 2, Installation/Accessories.
|
|↓ to
MENU
M
.
ENT
|↓ to
D
T
ELETE
RAIL
|→ to
N
AVIGATE
|↓ to
C
ANCEL
.
ENT
Cross track
error range
(off course
indicator)
Bearing
arrow
|
.
T
ENT
Y
RAILS
|
N
ENT
AVIGATE
|
|← to
R
ENT
EVERSE
|
N
AVIGATION
118
.
|
N
AVIGATE
. The unit asks if you're
ENT
Arrival
alarm
. The unit
ENT
to
EXIT
Hide quick links:
Advertisement
Table of Contents
