Epson Stylus Pro WT7900 User Manual page 93

Epson Stylus Pro WT7900/7910
Error messages
INK CARTRIDGE
PLEASE USE GENUINE EPSON INK
CARTRIDGES
INK CARTRIDGE
NON-GENUINE CARTRIDGE!
QUIALITY OF NON-GENUINE INK
MAY VARY.
NON-GENUINE CARTRIDGE MAY
NOT PERFORM AT OPTIMUM.
CONTINUE?
DECLINE
ACCEPT
WRONG MAINT. TANK RIGHT SIDE
MAINT. TANK WRONG TYPE INSERT
CORRECT TANK
INK CARTRIDGE ERROR
PLEASE INSTALL THE CORRECT
CARTRIDGE
NOZZLE CLOG DETECTED
NOT ENOUGH INK
CONTINUE CLEANING?
YES (RECOMMENDED)
NO
NOZZLE CLOG DETECTED
NOT ENOUGH EMPTY SPACE IN
MAINT TANK
CONTINUE CLEANING?
YES (RECOMMENDED)
NO
Error messages related to the options
Error messages
SProofer DISCONNECTED
CONNECT SpectroProofer TO THE
PRINTER AND RESTART THE PRINTER
ILS20EP DISCONNECTED
REFER TO THE MANUAL AND
CONNECT ILS20EP TO
SpectroProofer
RESTART THE PRINTER
User's Guide
Problem Solver
Description
Non-genuine ink cartridge
is installed.
Non-genuine ink cartridge
is installed.
A non-genuine
maintenance tank that
cannot be used with this
printer is installed.
An ink cartridge that
cannot be used with this
printer is installed.
There is not enough ink to
perform cleaning.
There is not enough space
in the maintenance tank
to perform cleaning.
Description
The SpectroProofer is not
connected to the printer
properly.
The color measurement
device (ILS20EP) is not
connected properly.
93
What to do
Replace the ink cartridge with a genuine Epson ink
cartridge.
See "About ink cartridges" on page 63
See "Replacing ink cartridges" on page 68
Select DECLINE to replace the ink cartridge with a
genuine Epson ink cartridge. Selecting ACCEPT may
void EPSON's warranty.
See "About ink cartridges" on page 63
See "Replacing ink cartridges" on page 68
Install a genuine maintenance tank that can be used
with this printer.
See "Replacing the Maintenance Tank" on page 70
Remove the ink cartridge, and install an ink cartridge
that can be used with this printer.
See "About ink cartridges" on page 63
See "Replacing ink cartridges" on page 68
By selecting YES, the message to replace the ink
cartridge is displayed. Replace the ink cartridge with a
new one to continue cleaning.
See "Replacing Ink Cartridges" on page 68
By selecting NO, stop cleaning and return to print ready.
By selecting YES, the maintenance tank replacement
message is displayed. Replace the maintenance tank
with a new one to continue cleaning.
See "Replacing the Maintenance Tank" on page 70
By selecting NO, cleaning stops and it returns to a print
ready status.
What to do
Turn the printer off, and then connect the
SpectroProofer to the printer properly.
See the SpectroProofer Mounter 24"/44" Setup
Guide
Turn the printer off, and then connect the color
measurement device (ILS20EP) to the SpectroProofer
properly.
See the SpectroProofer Mounter 24"/44" Setup
Guide