Epson Stylus Pro WT7900 User Manual page 89

Epson Stylus Pro WT7900/7910
Error messages
PAPER ERROR
LOAD PAPER CORRECTLY REFER TO
THE MANUAL
PAPER SENSOR ERROR
PRESS THE BUTTON LOAD
DIFFERENT PAPER
PAPER LOW
PAPER EJECT ERROR
REMOVE PAPER FROM PRINTER
PAPER SIZE ERROR
LOAD CORRECT PAPER SIZE
PAPER JAM
REMOVE PAPER
User's Guide
Problem Solver
Description
The paper is not loaded
correctly.
The barcode has not been
read correctly.
The roll paper is close to
running out.
Roll paper is used in Sheet
mode.
The loaded paper size
does not match the data
size.
The paper is jammed.
89
What to do
Press the button to release the paper presser, and
remove the paper. Then, load the paper correctly.
See "Using Roll Paper" on page 32
See "Using Cut Sheet Media" on page 38
Press the button to clear the error, or press the
button to release the paper presser to load a
different paper.
See "Using Roll Paper" on page 32
See "Using Cut Sheet Media" on page 38
Replace the roll paper with a new one.
See "Using Roll Paper" on page 32
Press the button to release the paper presser, and
then remove the paper.
Match the loaded paper size to the data size.
Remove the jammed paper.
See "Feeding or ejecting troubles" on page 102