Details Of Menu Mode - Epson Stylus Pro WT7900 User Manual

Epson Stylus Pro WT7900/7910

Details of Menu mode

PRINTER SETUP
* Default settings
Item
PLATEN GAP
PAGE LINE
ROLL PAPER MARGIN
PAPER SIZE CHECK
User's Guide
The Control Panel
Parameter
NARROW
STANDARD *
WIDE
WIDER
WIDEST
ON *
OFF
DEFAULT *
TOP 15/BOTTOM 35mm
TOP 35/BOTTOM 15mm
3mm
15mm
ON *
OFF
Explanation
You can adjust the distance between the print head and the paper.
❏
STANDARD: Normally, select STANDARD.
❏
When selecting a setting other than STANDARD, the following
icon is displayed on the LCD panel.
: NARROW
: WIDE
: WIDER
: WIDEST
You can select whether to print a page line (line along which to cut)
on the roll paper. Select ON if you want to print the page line, or OFF
otherwise.
A vertical line may be printed when the roll paper width set in the
computer is smaller than the width of the roll paper that is loaded in
the printer.
This setting is available for roll paper only.
You can select margins for roll paper.
❏
DEFAULT:
The top margin for Premium Glossy Photo Paper (250) is 20
mm and the bottom margin is 15 mm.
The top and bottom margins for other paper types is 15 mm.
❏
TOP 15/BOTTOM 35mm:
The top margin is 15 mm, the bottom is 35 mm, and the left
and right margins are 3 mm.
❏
TOP 35/BOTTOM 15mm:
The top margin is 35 mm, the bottom is 15 mm, and the left
and right margins are 3 mm.
❏
3mm:
The margins for all four sides are 3 mm.
❏
15mm:
The margins for all four sides are 15 mm.
The print size does not change even when the margins are changed.
You can select whether to check the paper width.
❏
ON:
Check the paper width and top edge of the paper.
❏
OFF:
Does not check the paper width and top edge of the paper.
The printer continues to print even if the paper width does not
match the data width, and the printer may print beyond the
paper. When this happens, ink may smear inside and outside
the printer when continuing to print. Normally, selecting ON is
recommended. Also top margin of the paper size may be widen.
22