Instructions For Using Paper - Epson Stylus Pro WT7900 User Manual

Epson Stylus Pro WT7900/7910

Instructions for Using Paper

Notes for handling paper
See the instructions below and the handling
instructions supplied with the paper for more details.
❏ Use Epson special media under the following
conditions (temperature: 15 to 25˚C and
humidity: 40 to 60%). In particular, use Epson
ClearProof Film under the following conditions
(temperature: 20 to 25˚C and humidity: 40 to
60%).
See "About Epson ClearProof Film (Epson
special media)" on page 59
❏ Do not bend the paper or scratch on the surface
of the paper.
❏ Keep fingers off the printable surface of the
media, as fingerprints may reduce the print quality.
❏ Set the roll paper by handling the edges of the roll
paper. Whenever possible, use gloves to handle
media.
❏ The paper may bend if the temperature and
humidity will change rapidly. Be careful not to
bend or soil the paper, and flatten it before setting
it in the printer.
❏ Do not lose the paper package so that you can use
it for storing the paper.
Notes for after printing
See the instructions below for after printing.
❏ Do not rub or scratch the print; otherwise, the ink
may come off.
❏ Do not touch the surface of the print; otherwise,
the ink may come off.
❏ Be careful not to bend or pile paper on top of
another, and dry it completely. The color may be
changed where the paper is piled. If you leave
paper lying on top of another, the scratches may
stay on the paper even after the paper dries.
❏ If you put the prints on the album before they dry,
they may be blurred. After you print, be sure to
dry the paper completely.
User's Guide
Paper Information
57
❏ Do not use a dryer to dry the printouts.
❏ Avoid direct sunlight.
❏ See the instructions of the paper for keeping the
color from fading. The print can keep the color
for a long time if you store it properly.
Note:
Typically, prints and photos fade over time (change
color) due to the effects of light and various
constituents in the air. This also applies to Epson
special media. However, with the correct storage
method, the amount of color change can be kept to a
minimum.
❏ See the instructions included with the Epson
special media for detailed information on
handling the paper after printing.
❏ The colors of photos, posters, and other printouts
appear different under different lighting conditions
(light sources*). The colors of printouts from this
printer may also appear different under different
light sources.
* Light sources includes sunlight, fluorescent light,
incandescent light, and other types.
Notes for storing the paper
See the instructions below and the handling
instructions supplied with the paper for more details.
❏ Avoid locations that are subject to direct sunlight,
excessive heat, or moisture.
❏ Keep the paper in the package and keep it on a flat
surface.
❏ Remove roll paper that is not in use from the
printer. Roll it properly and then store it in the
original packaging. If you leave the roll paper in
the printer, its quality will deteriorate.
❏ Do not wet the paper.
❏ Store printouts in a dark place to avoid direct
sunlight, excessive heat, and moisture to retain
the printed color.