Printing With Non-Epson Media; Setting The Custom Paper In The Printer - Epson Stylus Pro WT7900 User Manual

Epson Stylus Pro WT7900/7910
Printing with Non-Epson
Media
When using non-Epson media, register a custom
paper in Menu mode using the printer's control panel
and print using the registered settings. The registered
contents are stored when this printer is turned off.
You can register up to 10 types of custom paper.
Note:
❏ Make sure you check the paper characteristics such
as paper tension, ink fixing, or paper thickness
before setting the custom paper. See the description
that comes with the paper for information on the
paper's characteristics.
❏ Settings made on the printer's control panel take
priority over the settings in the RIP software.
❏ For unidirectional print settings, refer to your
software RIP documentation.
Setting the Custom Paper in the
Printer
Register custom paper on the printer's LCD panel. Set
the items for PAPER SETUP menu. The registered
number is displayed on the LCD panel.
Note:
The printer enters READY status when you press the
button at any point of making the following
settings. The settings you have made so far are
registered as the custom settings (including unchanged
settings).
A
Load the paper that you want to use.
Make sure you load the paper that is actually
used.
B
Enter the CUSTOM PAPER menu.
1. Press the button to enter the Menu
mode.
2. Press the /
SETUP, and then press the
3. Press the /
PAPER, and press the
User's Guide
Paper Information
button to display PAPER
button.
button to display CUSTOM
button.
C
Select the registered number for the user settings.
You can select the number from 1 to 10.
1. Press the
number you want to register.
2. Press the
The settings you make from step 4 are
registered in the number you have selected here.
Note:
We recommend you write down the registered
number and the settings you make from step 4.
D
Select paper type if necessary.
1. Press the
TYPE, and then press the
2. Press the
suitable paper type, and then press the
button.
3. Press the
4. Press the
5. Press the
previous menu.
E
Set the distance between the print head and the
paper (Platen Gap), if necessary.
1. Press the
GAP, and then press the
2. Press the
setting for the paper.
3. Press the
4. Press the
previous menu.
Note:
You can adjust the distance between the print
head and the paper. The print quality improves
when the Platen Gap is adjusted correctly. If the
Platen Gap is too narrow when you print on
thick paper, the print head touches the paper so
that the print head and the paper may be
damaged.
Paper Thickness
Thick paper
60
/ button to select the
button.
/ button to select PAPER
button.
/ button to select the
/ button to select media.
button.
button twice to go back to the
/ button to select PLATEN
button.
/ button to select a suitable
button.
button to go back to the
PLATEN GAP
WIDE
WIDER
WIDEST