The Font On The Printout Is Different From That On The Screen; The Edges Of Texts And/Or Images Are Not Smooth - Epson AcuLaser M4000N User Manual

The font on the printout is different from that on the screen

Cause
The EPSON Screen Fonts are not installed.

The edges of texts and/or images are not smooth

Cause
(PCL6 mode only) The resolution is set to Fast (300
dpi).
The printer does not have sufficient memory.
(PCL6 mode only) The RITech is set to Off.
AcuLaser M4000 Series
What to do
The screen fonts must be installed on the computer that you are
using. Otherwise, the font that you select is substituted by some
other font for display on the screen.
What to do
Access the printer driver, click the Graphics tab, then select Fine
(600 dpi) as the resolution.
Increase the printer memory.
Access the printer driver, click the Graphics tab, then select On
for RITech from the drop-down list.
User's Guide
Troubleshooting 171