Memory Problems
Insufficient memory for current task
Cause
The printer has insufficient memory for current task.
Insufficient memory to print all copies
Cause
The printer does not have sufficient memory to
collate print jobs.
AcuLaser M4000 Series
What to do
Add more memory for a permanent solution or lower print
quality temporarily in the printer driver.
If RAM Disk is set to Maximum or Normal on the control panel, you
can increase the available memory space by changing this
setting to Off.
What to do
Only one set of copies will be printed. Reduce the contents of
print jobs, or add more memory. For information on installing
more memory, see "Memory Module" on page 106.
If RAM Disk is set to Maximum or Normal on the control panel, you
can increase the available memory space by changing this
setting to Off.
User's Guide
Troubleshooting
162