Epson AcuLaser M4000N User Manual page 86

Optional RAM Error
The optional memory module may be corrupted or incorrect. Replace it with a new one.
Outbin Select Error
The specified paper size or paper type cannot be output to the face-up tray. Change the paper size
or paper type, or select the face-down tray as the output tray.
Paper Jam WWWW
The location where the paper jam occurred is displayed at WWWWW. WWWWW indicates the location of the
error.
If a paper jam occurs at two or more locations simultaneously, the corresponding multiple
locations are displayed.
Location
Paper Jam A
Paper Jam A B
Paper Jam MP A
Paper Jam C1 A
Paper Jam C2 A
Paper Jam C3 A
Paper Jam DM
Paper Jam STK
Paper Out tttt sssss
There is no paper in the specified paper source (tttt). Load paper of the size (sssss) into the paper
source.
Description
Paper is jammed at cover A. For instructions on clearing this type of paper jam,
see "Paper Jam A (Cover A)" on page 140.
Paper is jammed inside the output path cover (cover A or B) or fuser unit. For
instructions on clearing this type of paper jam, see "Paper Jam A B (Cover A
or B)" on page 143.
Paper is jammed at the indicated cassette. For instructions on clearing this
type of paper jam, see "Paper Jam MP A, Paper Jam C1 A, Paper Jam C2 A,
Paper Jam C3 A (All paper cassettes and Cover A)" on page 149.
Paper is jammed inside the optional Duplex Unit's paper path or cover (Duplex
Unit's cover). For instructions on clearing this type of paper jam, see "Paper
Jam DM (Duplex Unit's cover)" on page 152.
Paper is jammed inside the optional Stacker's paper path or cover (cover xx).
For instructions on clearing this type of paper jam, see "Paper Jam STK" on
page 153.
AcuLaser M4000 Series
Using the Control Panel
User's Guide
86