Epson AcuLaser M4000N User Manual page 117

10. Reattach the right side cover to the printer as shown below. Then, tighten the screw on the back
of the printer.
Warning:
w
Tighten the screw firmly to prevent the printer's right side cover from the falling off when moving
the printer.
11. Reconnect the interface cable and power cord and turn the printer on.
To confirm that the option is installed correctly, print a status sheet. See "Printing a Status
Sheet" on page 155.
AcuLaser M4000 Series
Installing Options
User's Guide
117