Epson AcuLaser M4000N User Manual page 63

AcuLaser M4000 Series User's Guide
Duplex
Turns duplex printing on or off. This allows you to print on both sides of a page.
Binding
Specifies the binding direction of the printout.
Start Page
Specifies whether printing starts from the front or back of the page.
Offset Stacking
Specifies whether or not to separate print jobs by shifting the output to the left and then to the right.
Paper Type
Specifies the type of paper to be used for printing. The printer adjusts the printing speed according
to this setting. The printing speed is reduced when Thick, Extra Thk, or Transparency is selected.
Skip Blank Page
Enables you to skip blank pages when printing. This setting is available when you print in the
ESC/Page, ESCP2, FX, or I239X mode.
Auto Eject Page
Specifies whether or not to eject paper when the limit specified in the Time Out setting is reached.
The default is Off, which means paper is not ejected when the time-out limit is reached.
Size Ignore
If you want to ignore a paper size error, select On. When you turn this item on, the printer keeps
printing even if the image size exceeds the printable area for the specified paper size. This may
cause smudges because of the toner that is not transferred onto the paper properly. When this item
is turned off, the printer stops printing if a paper size error occurs.
Auto Cont
When you turn this setting on, the printer automatically continues printing after a certain period of
time when one of the following errors occurs: Paper Set, Print Overrun, or Mem Overflow. When
this option is off, you must press the Start/Stop button to resume printing.
Using the Control Panel 63