Epson AcuLaser M4000N User Manual page 81

AcuLaser M4000 Series User's Guide
Cancel Print Job (by host)
The print job is canceled at the printer driver.
Can't Print
The print data is deleted because it is incorrect.
Make sure the appropriate paper size and printer driver are used.
Can't Print Duplex
The printer has encountered problems during duplex printing. Make sure you are using an
appropriate type and size of paper for the duplex printing. The problem could also be a result of
incorrect settings for the paper source you are using. Pressing the Start/Stop button will print the
rest of the print job on only one side of the paper. Press the + Cancel Job button to cancel the print
job.
Can't Use Bookmark
The registered menu cannot be used because the menu is disabled by changing any settings after
registered the menu in bookmark.
Cartridge Near Expiry
The life of the imaging cartridge is near its end. You need to prepare a new imaging cartridge.
Cassette Error yyy
The optional paper cassette is not installed properly. Turn off the printer, remove the optional
cassette, and re-install it. For more information on installing the optional paper cassette, see
"Installing the optional paper cassette unit" on page 96.
Check Duplex Page Size
The paper size loaded in the printer is not appropriate for the optional Duplex Unit. Load correct
paper size and press the Start/Stop button to resume printing.
Check Paper Size
The paper size setting is different from the size of paper loaded in the printer. Check to see if the
correct size of paper is loaded in the specified paper source.
To clear this error, select Clear Warning from the control panel's Reset Menu. See "How to access
the control panel menus" on page 53 for instructions.
Using the Control Panel 81