Table of Contents
Advertisement
The font on the printout is different from that on the screen
Cause
The PostScript screen fonts are not installed.
For Windows users only
The appropriate substitution fonts are not correctly
specified on the Device Settings sheet of the printer's
Properties dialog box.
The printer fonts cannot be installed
Cause
The Emulation menu in the printer's Control Panel is not
set to PS3 for the interface that you are using.
The edges of texts and/or images are not smooth
Cause
The Print Quality is set to Fast.
The printer does not have sufficient memory.
The printer does not print normally via the USB interface
Cause
For Windows users only
The Data Format setting in the printer's Properties is not
set to ASCII or TBCP.
EPSON AcuLaser M8000 Series
What to do
The PostScript screen fonts must be installed on the computer
that you are using. Otherwise, the font that you select is
substituted by some other font for display on the screen.
Specify the appropriate substitution fonts using the Font
Substitution Table.
What to do
Change the Emulation Menu setting to PS3 for the interface that
you are using, then try reinstalling the printer fonts again.
What to do
Change the Print Quality setting to Fine or Maximum.
Increase the printer memory.
What to do
The printer cannot print binary data when it is connected to the
computer via the USB interface. Make sure that the Data Format
setting, which is accessed by clicking Advanced on the PostScript
sheet of the printer's Properties, is set to ASCII or TBCP.
If your computer is running Windows Vista, Vista x64, XP, XP x64,
click the Device Settings tab in the printer's Properties, then click
the Output Protocol setting and select ASCII or TBCP.
User's Guide
Troubleshooting
200
Advertisement
Table of Contents
