Dynex OPSYS MW 91000051 User Manual page 65

6. The cursor is positioned under the first character of the name. If
the name is to be changed, enter the name using the keypad and
press ENTER. The first step of the wash protocol will be
displayed:
MOVE 1-12
Opsys MW™ User's Guide
Modifying a Wash Protocol
1 Cycles
DELETE EDIT
Note: The example above shows the MOVE
operation as the first step in the protocol. The
actual operation that is shown will depend
upon the protocol that is being modified.
Note: For each step that is displayed, the
operation being carried out and the value for
that operation are displayed. In the MOVE
example above, the Start Strip is 1, the End
Strip is 12, and the number of cycles is 1.
57