Selecting Clean
The CLEAN command enables the washer to be cleaned automatically at a
specified interval.
1. Scroll right to display the next section:
2. Select CLEAN. The display will read:
3. Select YES if you want periodic automatic cleaning. The display will
read:
4. Enter the desired interval using the up/down scroll keys and press
ENTER.
The display will read:
5. Enter the desired volume of fluid to be dispensed.
6. Press ENTER. The display will read:
Opsys MW™ User's Guide
Select option
CLEAN
Auto Clean?
YES
NO
Interval (Hrs)
1
Note: The minimum interval is 1 hour, and the
maximum interval is 9 hours.
Fluid Volume?
2500
Note: A cleaning volume ranging from 50 to
9,999 microliters can be entered. Follow the
instructions on page Error! Bookmark not
defined. for refilling the wash container.
Select option
CLEAN
Configuring the System
37