Dynex OPSYS MW 91000051 User Manual page 54

Creating a New Wash Protocol
To specify a Purge:
1. Display the header information for the selected wash protocol, as
outlined on page 41. The display will read:
2. Select PURGE. The display will read:
3. Use the keypad to enter the volume of fluid to be dispensed.
4. Press ENTER. The display will read:
46
Note: A purge must be performed outside of a
Move cycle.
Select option
MOVE PURGE
Fluid volume? 350
Note: A purge volume ranging from 50 to
9,999 microliters can be entered.
Select option
MOVE PURGE
Opsys MW™ User's Guide