Figure 59: Preferred Path Configuration
This procedure only specifies that data will enter and exit Director 1 through
specific ports on the path to Director 3. The procedure must be repeated at the
second director as follows:
1. Select the Preferred Path option from the Element Manager application's
2. Click Add. The Add Preferred Path dialog box displays
3. For the director entry port, type 11 in the Source Port field. For the director
SAN High Availability Planning Guide
Configure menu. The Configure Preferred Paths dialog box displays.
(top of
Figure
59).
exit port, type 21 in the Exit Port field. For the destination device (Director
3), type 22 in the Destination Domain ID field.
Physical Planning Considerations
153