HP 316095-B21 - StorageWorks Edge Switch 2/24 Planning Manual page 70

Planning Considerations for Fibre Channel Topologies
between device D
H_Ports, device D
communication pair and the NL_Port on device D
that allows frames to pass around the loop at the full switch bandwidth.
Part B of
frame transmission between device D
closes and other ports attached to initiating devices arbitrate for loop access.
When operating in shared mode, the switch is a serially reusable resource that
provides service access to all ports on the loop. Access is granted by successful
arbitration. When arbitration is won by a device, the loop is busy and other
arbitrating devices must wait for loop access.
Device attachment and loop construction are not limited to the eight switch
H_Ports. Through the use of cascaded unmanaged hubs, the Fibre Channel
architectural limit of 125 FC-AL devices can attach to the switch. For example,
Figure 28
and two unmanaged hubs.
Hubs are cascaded through H_Port-to-H_Port connections (one port per switch or
hub). Server S
H_Ports on all three hubs and NL_Ports on the remaining 18 devices.
S1
Figure 28: 20-Device private arbitrated loop
70
and server S
1
, device D
1 2
Figure 27 shows the logical equivalent of this arbitrated loop. When
shows a private loop composed of a loop switch, 20 FC-AL devices,
communicates with device D
1
Loop Switch
travels through a loop that consists of all eight
1
, and server S Each H_Port not participating in the
1.
2
and server S
1
through a loop that includes
1
Loop Switch
Hub
H_Ports
SAN High Availability Planning Guide
provide a repeater function
completes, the loop circuit
1
H_Ports
Hub
D1