Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102
How to Log In to the WG102 Using Its Default IP Address
192.168.0.229 is the default IP address of your access point. The WG102 is set, by default, the
1.
DHCP client to be disabled.
Note: The computer you are using to connect to the WG102 should be configured with an IP
address that starts with 192.168.0.x and a Subnet Mask of 255.255.255.0.
Open a Web browser such as Internet Explorer or Netscape Navigator.
2.
Connect to the WG102 by entering its default address of
3.
browser.
A login window like the one shown below opens:
4.
Figure 3-6: Login window
Log in use the default user name of admin and default password of password.
Once you have entered your access point name, your Web browser should automatically find
the WG102 Access Point and display the home page, as shown in
page" on page
3-8.
Basic Installation and Configuration
http://192.168.0.229
November 2005
into your
"Login result: WG102 home
3-11