System Requirements; What's In The Box - NETGEAR WG102 - ProSafe Wireless Access Point Reference Manual

Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102
• WG511 802.11g 54 Mbps Wireless CardBus Adapter
• WG111 801.11g 54 Mbps Wireless Bridge

System Requirements

Before installing the WG102, make sure your system meets these requirements:
• A 10/100 Mbps Local Area Network device such as a hub or switch
• The Category 5 UTP straight through Ethernet cable with RJ-45 connector included in the
package, or one like it
• A 100-240 V, 50-60 HZ AC power source
• A Web browser for configuration such as Microsoft Internet Explorer 6.0 or above, or
Netscape Navigator 4.78 or above
• At least one computer with the TCP/IP protocol installed
• 802.11g or 802.11b-compliant devices, such as the NETGEAR WG511 Wireless Adapter

What's In the Box?

The product package should contain the following items:
• NETGEAR WG102 ProSafe 802.11g Wireless Access Point
• Power adapter and cord
• Straight through Category 5 Ethernet cable
• 802.11g ProSafe Wireless Access Point Installation Guide WG102
• Resource CD for the NETGEAR WG102 ProSafe 802.11g Wireless Access Point
This Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102
(202-10144-01).
• Support Registration card
Contact your reseller or customer support in your area if there are any missing or damaged parts.
You can refer to the Support Information Card for the telephone number of customer support in
your area. You should keep the Support Information card, along with the original packing
materials, and use the packing materials to repack the WG102 if you need to return it for repair. To
qualify for product updates and product warranty registrations, we encourage you to register on the
NETGEAR Web site at: http://www.NETGEAR.com.
Introduction
(12V DC, 1 A)
November 2005
2-5