NETGEAR WG102 - ProSafe Wireless Access Point Reference Manual page 79

Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102
station sends out an RTS packet to the receiving station, and waits for the receiving station to
send back a CTS (Clear to Send) packet before sending the actual packet data. The default is
2346.
• Fragmentation Length: This is the maximum packet size used for fragmentation. Packets
larger than the size programmed in this field will be fragmented. The Fragment Threshold
value must be larger than the RTS Threshold value. The default is 2346.
• Beacon Interval: The Beacon Interval specifies the interval time (between 20ms and 1000ms)
for each beacon transmission. The default is 100.
• DTIM Interval: The DTIM (Delivery Traffic Indication Message) specifies the data beacon
rate between 1 and 255. The default is 1.
• Preamble Type: A long transmit preamble may provide a more reliable connection or slightly
longer range. A short transmit preamble gives better performance. Auto will automatically
handle both long and short preamble. The default is Auto.
Advanced Configuration
November 2005
5-7