Ap Settings: Enabling Wireless Bridging And Repeating - NETGEAR WG102 - ProSafe Wireless Access Point Reference Manual

Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102

AP Settings: Enabling Wireless Bridging and Repeating

The WG102 Access Point lets you build large bridged wireless networks.
Figure 5-5: Advanced Wireless Settings Access Point Mode settings
Note: All bridge mode options are not available when AutoCell Auto RF Management
is enabled (the default setting).
Examples of wireless bridged configurations are:
• Point-to-Point Bridge
– In this mode, the WG102 will communicate with another bridge-mode wireless station.
– In addition, you have the option of enabling client associations with this WG102.
– You must enter the MAC address of the other bridge-mode wireless station in the field
provided. Use WEP to protect this communication.
5-8
November 2005
Advanced Configuration