How To Configure Wpa With Radius - NETGEAR WG102 - ProSafe Wireless Access Point Reference Manual

Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102

How to Configure WPA with Radius

Note: Not all wireless adapters support WPA. Furthermore, client software is required on the
client. Windows XP and Windows 2000 with Service Pack 3 do include the client software that
supports WPA. Nevertheless, the wireless adapter hardware and driver must also support WPA.
Consult the product document for your wireless adapter and WPA client software for instructions
on configuring WPA settings.
To configure WPA, follow these steps:
Log in at the default LAN address of
1.
admin and default password of password, or using whatever LAN address and password you
have set up.
Click Radius Server Settings in the Security menu.
2.
Figure 3-12: Radius Server Settings menu
Enter the Radius settings.
3.
3-22
http://192.168.0.229 with the default user name of
Basic Installation and Configuration
November 2005