Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102
Click Radius Server Settings in the Security menu.
2.
Figure 3-18: Radius Server Settings menu
Enter the Radius settings.
3.
•
Authentication/Access Control Radius Server Configuration: This configuration is
required for authentication using Radius. IP Address, Port No. and Shared Secret is
required for communication with Radius Server. A Secondary Radius Server can be
configured which is used on failure on Primary Radius Server
•
IP Address: The IP address of the Radius Server. The default is 0.0.0.0.
•
Port Number: Port number of the Radius Server. The default is 1812.
•
Shared Secret: This is shared between the Wireless Access Point and the Radius Server
while authenticating the supplicant.
•
Re-authentication Time: The time interval in seconds after which the supplicant will be
authenticated again with the Radius Server. The default is 3600 seconds.
3-30
Basic Installation and Configuration
November 2005