NETGEAR WG102 - ProSafe Wireless Access Point Reference Manual page 90

Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102
To clear all data and restore the factory default values:
Power off the WG102 and power it back on.
1.
Use something with a small point, such as a pen, to press the Reset button in and hold it in for
2.
at least 5 seconds.
Release the Reset button.
3.
The factory default configuration has now been restored, and the WG102 is ready for use.
6-4
November 2005
Troubleshooting