How To Log In To The Me103 Using Its Default Ip Address - NETGEAR ProSafe ME103 Reference Manual

How to Log In to the ME103 Using Its Default IP Address

192.168.0.224 is the default IP address of your access point. However, the ME103 is also set,
1.
by default, to be a DHCP client. So, if the ME103 has not yet been installed, and there is no
DHCP server on the network, you can log in to the ME103 using its default IP address.
Otherwise, you should use either the NetBIOS login described in
ME103 Using Its Default NetBIOS Name" on page 3-8
the ME103 Access Point" on page
Note: The computer you are using to connect to the ME103 should be configured with an IP
address that starts with 192.168.0.x and a Subnet Mask of 255.255.255.0.
Open a Web browser such as Internet Explorer or Netscape Navigator.
2.
Connect to the ME103 by entering its default address of
3.
browser.
A login window like the one shown below opens:
4.
Figure 3-7: Login window
Log in use the default user name of admin and default password of password.
Once you have entered your access point name, your Web browser should automatically find
the ME103 Access Point and display the home page, as shown in
page" on page 3-9.
Basic Installation and Configuration
Reference Manual for the ME103 802.11b ProSafe Wireless Access Point
3-5" which uses a static IP configuration.
August 2003
"How to Log In to the
or the procedure described in
http://192.168.0.224 into your
"Login result: ME103 home
"Set up
3-10