NETGEAR WG102 - ProSafe Wireless Access Point Reference Manual page 53

Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102
• Global-key Re-Key Time: Check on this option to enable Re-keying of Global Key. The
Global Key Re-Key can be done based on time interval in seconds or number of packets
exchanged using the global key. The default is 3600 seconds.
• Update if any station disassociates: Check on this option to refresh global key when any
stations disassociated with wireless Access Point.
• Accounting Radius Server Configuration: This configuration is required for accounting
using Radius Server. IP Address, Port No. and Shared Secret is required for
communication with Radius Server. A Secondary Radius Server can be configured which
is used on failure on Primary Radius Server.
• IP Address: The IP address of the Radius Server. The default is 0.0.0.0.
• Port Number: Port number of the Radius Server. The default is 1813.
• Shared Secret: This is shared between the Wireless Access Point and the Radius Server
while authenticating the supplicant.
Click Apply to save your settings.
4.
Click Security Profiles Settings in the Security menu of the WG102, select the profile you
5.
choose to configure, and click Edit to view the Security Profiles Configuration menu.
Figure 3-16: WEP/WPA Settings menu
Choose WPA2 with Radius from the list.
6.
Click Apply to save your settings.
7.
Basic Installation and Configuration
November 2005
3-27