Check Before Using Underwater - Panasonic Lumix DC-TS7 Owner's Manual

3
After the final screen (12/12), press [MENU/SET] to finish.
• When [MENU/SET] is pressed after the final screen (12/12), [Precautions] is not
displayed from the next time the power is turned on.
• This can also be viewed from [Precautions] in the [Setup] menu.

Check before using underwater

Always wipe the rubber seal on the side door and the area where rubber
seal sits with a dry, lint-free cloth.
1
Check that there are no foreign objects on the inner side of the side
door.
• If there is any foreign object, such as lint, hair, sand, etc., on the surrounding area,
water will leak within a few seconds, causing malfunction.
• Wipe it off with a soft, dry cloth if there is any liquid.
It may cause water leaks and malfunction if you use the camera with liquid
adhered.
• If foreign objects are present, wipe them off with a dry, lint-free cloth.
• Be extremely careful to remove the small sand etc. that may adhere to the sides
and corners of the rubber seal.
2
Check for cracks and deformation of the rubber seal on the side door.
• The integrity of the rubber seals may decrease after about 1 year, with use and
age. To avoid permanently damaging the camera, the seals should be replaced
once each year. Please contact Panasonic for related costs and other information.
Preparation/Basic
(ENG) DVQX1500
17