Table of Contents
Advertisement
Beach & Snorkeling Mode
This is optimal for taking pictures underwater and at the beach. Depth meter will automatically
operate. It can be a rough indication of how deep you have gone underwater. You can use
[Color Reproduction]
red tinge.
1
Press [MODE].
2
Press 3/4/2/1 to select [Beach & Snorkeling], and then press [MENU/
SET].
∫
About the [Depth indicator]
Make sure to perform [Depth indicator] in [GPS/Sensor] menu to set the depth meter before
you dive underwater.
1
Press [MENU/SET].
2
Press 3/4/2/1 to select [GPS/Sensor] menu, and then press [MENU/SET].
3
Press 3/4 to select [Depth indicator], and then press [MENU/SET].
•
Confirmation screen is displayed. Depth meter will be set to 0 m (0 feet) when [Yes] is selected.
Exit the menu once completed.
∫
About the underwater screen display
When [DISP.] is pressed several times, the environment information
screen for the depthmeter, etc. is displayed.
A Depth meter
•
Depth meter will display the depth to 13 m (43 feet) in 3 levels.
When the third level is flashing
Entire depth meter is flashing
•
Camera will automatically set to the optimal picture quality for underwater from the depth
information. Icons showing the picture quality will switch in such a case.
It is adjusted to optimal picture quality for underwater up to a depth of 3 m (10 feet) when
[
]
[
] is displayed.
It is adjusted to optimal picture quality for underwater for a depth of 3 m (10 feet) to 13 m
[
]
(43 feet) when [
(P115)
in the [Rec] menu and take pictures underwater without losing the
You are approaching a depth of 13 m (43 feet), which is the
diving limit of this unit. Please be aware.
There is risk that depth has exceeded 13 m (43 feet).
] is displayed.
Recording
- 81 -
0ft
A
GPS
43ft
Hide quick links:
Advertisement
Table of Contents
