Viewing Network Settings - TANDBERG STORAGELIBRARY Manual

The following drive information is available from the Partitions/Drive report:
Drive Vendor Name <value>
Drive Product Name <value>
SCSI ID <value as applicable>
Fibre Channel ID <value as applicable>
Fibre Topology <value as applicable>
Fibre Channel Speed <value as applicable>
Assigned Partition <1, 2, 3, or 4>
Control Path <Enabled, Disabled>
Drive Serial Number (Drive SN): <value>
Drive Firmware Version (Drive FW): <value>
World Wide Name
World Wide Node Name
The following partition information is available from the Partitions/Drive report:
Partition Number
Control Path <No or Yes, Drive ID>
Status <online/off-line>
Number of slots
Drive ID numbers for drives in the partition
Total number of cartridges
Barcode Mode <6 Character or 13 Character>
Autoclean <Enabled or Disabled>
The path to open the report from the remote management interface is Reports > Partitions/Drive
Settings.

Viewing Network Settings

The Network Settings report provides information on the following library settings:
Network Settings—Address mode (static or dynamic), IP address, subnet mask, gateway, and
MAC address
Notification—SNMP server IP address, e-mail address, notification enabled or disabled,
notification severity
The path to open the report from the front panel interface or from the remote management interface is
Reports > Network Settings.
50 Getting Status and Information