Figure 17 Removing The Magazine From The Library; Figure 18 Gently Push The Cartridge Into The Magazine Slot; Figure 19 Push The Release Knob Towards The Cartridge To Eject The Cartridge From The Slot - TANDBERG STORAGELIBRARY Manual

Figure 17 Removing the Magazine from the Library

Inserting Cartridges into the Magazine
When inserting cartridges, the access door of the cartridge must face the magazine slot opening.
Push the cartridge carefully into the magazine slot until it locks in place. The rear side of the cartridge
with the Write Protect switch and the barcode label must face out. Make sure the cartridges latch
properly.

Figure 18 Gently Push the Cartridge into the Magazine Slot

Removing Cartridges from the Magazine
Press the cartridge release tab towards the cartridge until the cartridge is released. The cartridge is
spring loaded, so it is important to prevent the cartridge from popping all the way out.
If the cartridge falls down, it might be damaged and data could be lost.
Caution

Figure 19 Push the Release Knob towards the Cartridge to Eject the Cartridge from the Slot

46 Running the Library