Words Commonly Used On The Fpi And Rmi - TANDBERG STORAGELIBRARY Manual

Details on user privileges include:
One administrative login is available on the library. The user name is Administrator
One operator login is available on the library. The user name is Operator
Any logged in operator or administrative user who is inactive for more than "N" minutes is
automatically logged out. "N" is user settable from 1 to 9 minutes
Selecting "Log Out" or "X" in the top right corner of the remote management interface closes the
application and logs the Operator and Administrator out
Only one user can be logged in at one time from either the front panel or the remote management
interface

Words Commonly Used on the FPI and RMI

Some of the words displayed on the FPI and RMI screens may need an explanation.
Table 2 Commonly Used Word on FPI and RMI
Word Abbr. in
FPI
Idle
Drive Empty __
Drive Loaded ld
Drive Idle ie
Drive Rewinding rw
Drive Seeking sk
Drive Reading rd
Drive Writing wr
Drive Erasing er
Drive Cleaning cl
Drive Loading ld
Drive Unloading ul
Drive Update ur
Ready
Drive Updating ud
Drive ca
Calibrating
During inventory and in the Maps menu different symbols are displayed on the FPI to indicate if there
are cartridges present in the magazines, in the drives and in the robotics.
StorageLibrary T40 Installation and User Guide
Description
The library is idle
There is no cartridge in the drive.
A cartridge is loaded in the drive
A cartridge is loaded and the drive is ready to use it.
The drive is rewinding the tape
The drive is searching for specific data on the tape.
The drive is reading data for transfer to a host via the SCSI interface.
The drive is writing data received from a host to the tape.
The drive is erasing data from parts of or the whole of the tape.
A cleaning tape has been inserted into the drive, and the drive is
using it to clean the relevant mechanical parts.
A tape has been inserted into the drive. The drive is in the process of
mechanically loading the tape.
The drive is in the process of mechanically unloading the tape.
The drive has completed an internal update.
The drive is in the process of an internal firmware update.
A data tape has been inserted and loaded into the drive. The drive is
in the process of measuring its physical properties.
27