Table of Contents
Advertisement
7
Running the Library
This chapter explains how to access and operate your library. Most of the library functions described
here can be found under the Operations menu.
Logging In
To access the remote management interface, Operator and Administrator must log in to the library to
perform library functions or view library operations.
If you are logging in to the library for the first time using the default Administrator account
(Administrator), enter the default password (administrator). After you log on, it is recommended that
you change the default Administrator password.
The password protection on the front panel interface is disabled when you power ON the library for
the first time. This means that anyone has full access to the library, and can do anything without being
asked for a password. As long as there is no FPI password enabled, regardless of how many times
the system is restarted, the library will have this "free access".
Once the FPI password is enabled, the user will need to enter an Operator password or an
Administrator password. Access to the library is now limited at two levels. When a user tries to access
the library now, an "Enter Password" prompt appears on the screen.
Logging Out
On both the front panel interface and the remote management interface there is a log out functionality.
Log out when you have finished accessing the library. Logging out secures the library from being
accessed by unauthorized users.
From the remote management interface select the LOGOUT button at the top of the screen to log out,
or select X in the top right corner of the screen to close the browser window and log the Operator and
Administrator out.
From the front panel interface select Logout from the Operations menu to log out from the library.
Importing Cartridges
In the StorageLibrary T40 there are two methods to import cartridges: via the I/E slot or via bulk
loading of magazines.
StorageLibrary T40 Installation and User Guide
41
Advertisement
Table of Contents
Troubleshooting
