Changing The Headlight Bulbs - MOTO GUZZI BREVA V750IE Manual

Hide thumbs Also See for BREVA V750IE:
Table of Contents

Advertisement

1
4
3
2
CHANGING THE HEADLIGHT
BULBS
Carefully read page 73 (BULBS).
The headlight contains:
– one low/high beam bulb (1) (upper);
– one parking light bulb (2) (lower).
To change, proceed as follows:
u
Place the vehicle on the stand, see page
46 (PUTTING THE VEHICLE ON THE
STAND).
u
To remove the complete reflector from
headlight body, loosen the screw (3).
74
use and maintenance Breva
5
2
LOW/HIGH BEAM BULB
– Do not pull on the wires to extract the
bulb connector.
u
Grasp the bulb connector (4) and pull to
disconnect it from the bulb.
u
Slip off the protection element (5) with
your fingers.
u
Unhook the two ends of the retaining
spring (6) positioned on the bulb holder
(7).
u
Extract the bulb from its seat.
NOTE
Insert the bulb in the bulb holder,
making the relevant positioning seats
coincide.
u
Fit a new bulb of equal rating.
7
6
PARKING LIGHT BULB
To extract the bulb holder, do not pull
the electric wires.
u
Grasp the parking light (8) bulb holder
and pull to extract.
u
Withdraw the bulb (2) and replace it with
one of the same type.
NOTE
located in the bulb holder.
8
2
CAUTION
Make sure the bulb is correctly

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents