Installing The Battery - MOTO GUZZI BREVA V750IE Manual

2
4

INSTALLING THE BATTERY

Carefully read page 65 (BATTERY).
u Make sure that the ignition switch is in
position " ".
u Remove the rider seat, see page 21
(UNLOCKING/LOCKING THE SEAT).
u Remove the left side body panel, see
page 57 (REMOVING THE SIDE BODY
PANELS).
u Lift the battery retaining bracket (4)
taking care not to scratch the tank (if
necessary protect the tank with soft
cloth).
N O T E
T h e b a t t e r y ( 1 ) m u s t b e
positioned in its compartment with the
terminals directed towards the rear part of
the vehicle.
3 1
4
u Partially install the battery (1) into its
seat.
u Connect the battery breather hose.
Upon reassembly, connect first the
positive cable (+) and then the negative
cable (–).
u Connect the positive terminal (+) by
means of the screw (2).
u Connect the negative terminal (–) by
means of the screw (3).
u Coat the terminals of cables and battery
with neutral grease or Vaseline.
u Install the battery in the correct position,
fully into its seat.
5
WARNING
u Refit the rider seat, see page
(UNLOCKING/LOCKING THE SEAT).
u
Move battery bracket (4) down, and
engage it onto reference pin (5).
u Refit the left side body panel, see page
57 (REMOVING T HE SIDE BO DY
PANELS).
CAUTION
When the battery is removed, the digital
clock is automatically reset. For setting
i n s t r u c t i o n s , s e e p a g e
(MULTIFUNCTION DIGITAL DISPLAY).
use and maintenance Breva
21
1 6
69