Identification Data; Joints With Screw Clamps - MOTO GUZZI BREVA V750IE Manual

IDENTIFICATION DATA

It is a good rule to write down the frame
and engine numbers in the space provided
in this manual.
The frame number must be quoted when
purchasing spare parts.
NOTE
Do not alter the identification
numbers if you do not want to incur in
severe penal and administrative sanctions.
In particular, the alteration of the frame
number results in the immediate invalidity
of the warranty.
FRAME NUMBER
The frame number (1) is stamped on the
right side of the steering column.
Frame no.
52 use and maintenance Breva
ENGINE NUMBER
The engine number (2) is stamped on the
left side close to the oil level plug/dipstick.
Engine no.

JOINTS WITH SCREW CLAMPS

CAUTION
Remove ONLY the clamps indicated in
the maintenance procedures.
This text is not to be intended as an
authorisation to arbitrarily remove the
clamps present on the vehicle.
WARNING
Before removing a clamp, make sure
that the removal does not involve any
f l u i d l e a k a g e ; i f s o , p r o v i d e f o r
preventing such leakage and protect
the components positioned near the
joint.
SCREW CLAMPS
For the removal and installation it is
sufficient to use a simple screwdriver.
CAUTION
Check the conditions of the clamp and
if necessary replace it with a new one of
the same type and dimensions, to be
requested to a Moto Guzzi Authorised
Dealer.
When fastening the clamp, make sure
that the joint is sufficiently stable.