1
2
REMOVING THE REAR-VIEW
MIRRORS
u
Place the vehicle on the stand, see page
46 (PUTTING THE VEHICLE ON THE
STAND).
u
Lift the protection rubber block (1) and
turn the lock nut (2).
CAUTION
H a n d l e t h e p l a s t i c a n d p a i n t e d
components with care to avoid scraping
or damaging them.
u
Remove the rear-view mirror (3).
NOTE
Repeat the procedure to remove
the other mirror.
58
use and maintenance Breva
3
CAUTION
On refitting, adjust the rear-view mirrors
and tighten the nuts to secure them
firmly in place.
Once assembled:
u
Refit the rubber block (1).
REMOVING THE HEADLIGHT
FAIRING
u
Place the vehicle on the stand, see page
46 (PUTTING THE VEHICLE ON THE
STAND).
u
Unscrew and remove the four screws
(4).
CAUTION
On reassembly, tighten the screws (4)
moderately to avoid damage to the
plastic material.
CAUTION
H a n d l e t h e p l a s t i c a n d p a i n t e d
components with care to avoid scraping
or damaging them.
u
Completely remove the headlight fairing.
Once assembled:
u
Ensure the headlight fairing is securely
fastened to the vehicle.
ADJUSTING THE HEADLIGHT
FAIRING HEIGHT
It is possible to adjust headlight fairing
height by turning the fastening and
adjustment screws of its supports.
4