Intel SMALL BUSINESS SERVER Manual page 73

NOTE: If you enter higher numbers in Number of processes or % of RAM fields, this may have negative
impact on efficiency of testing other parts of the system.
9. Click OK to close BurnInTest Preferences window
10. You can save this configuration for future use by selecting Configuration -> Save config
as from menu
11. Insert any data CD into CD-drive.
12. Check that the server and the router are connected to the LAN switch.
13. Select Test -> Start test run from menu. Click OK.
NOTE: Measured hard-disk performance is likely to be significantly lower than its performance measured
under normal conditions. This does not indicate a problem.
- 73 -