Intel SMALL BUSINESS SERVER Manual page 37

5. At the Broadband Connection screen select A direct broadband connection and click
Next
6. At the Network Connection screen select Use the following IP address and fill in the
details for your WAN subnet. An example configuration could be, assuming your router
has an IP address of 192.168.2.1
IP address: 192.168.2.2
Subnet mask: 255.255.255.0
Default gateway: 192.168.2.1
Click Next
7. At the next screen (still called Network Connection) ensure that the correct network
adaptors are configured for internal/external access, and click Next
NOTE: Always Choose Direct Broadband connection if you will be installing ISA
8. At the Direct Broadband Connection fill in the internal IP address of the router for the
default gateway, in this instance 192.168.2.1, and provide the DNS server information
provided by your ISP. Click Next
9. At the Firewall screen check Enable firewall and click Next
10. At the Services Configuration screen, check all services apart from FTP and click Next
11. At the Web Services Configuration screen select Allow access to only the following
Web site services from the Internet and check all Web services with the exception of
Server performance & usage reports and Business Web Site. Click Next
12. At the Web Server Certificate screen, select Create a new Web server certificate and
enter the certificate name. The certificate name should be the same as the url you type for
remote access: Usually remote.(company name).com. Click Next
13. At the Internet E-mail screen, select Enable Internet e-mail and click Next
14. At the E-mail Delivery Method screen select Use DNS to route e-mail and click Next
- 37 -