- 22 -
14. Press <F10> and then <Enter> to save settings and reset the system
Preparing RAID Array
Now you should create a RAID-5 array for the server.
1. During system boot up press <Ctrl>+<G> at the same time when "Press <Ctrl>+<G> to
enter RAID BIOS Console" is displayed at the bottom of the screen.
2. Wait until RAID BIOS Console is launched
3. Click Start
4. Now you should see three hard-drives listed in Ready state
5. Click Configuration Wizard on the left pane
6. Select New Configuration and click Next
7. Select Custom Configuration and click Next