Intel SMALL BUSINESS SERVER Manual page 24

10. Select RAID 5 for RAID Level
11. Select Adaptive for Read Policy
12. Select Write Back for Write Policy
NOTE: You will be allowed to select Write Back mode only if Battery Backup Unit is properly installed and
charged.
NOTE: With RAID Controller firmware version 314p, next time you enter BIOS RAID Console and open
logical disk properties the Write Policy may be incorrectly shown as Write Thru, even though it is set to
Write Back.
13. Select Cached for Cache Policy
14. Leave default value for stripe size
15. In Select Size field enter number shown as a size of RAID 5 volume. It should be equal 2x
size of a single hard-drive.
16. Click Accept
17. Click Next
18. On the next screen click Accept once again to save the configuration.
19. Click Yes to confirm saving the configuration.
20. Click Yes to initialize the new logical drive.
21. Click Home
- 24 -