Intel SMALL BUSINESS SERVER Manual page 28

5. At the Prompt, select Intel® RAID Controllers For Windows 2003 and press Enter
6. Windows will state that the driver is older than the Windows default driver. Press S to use
it anyway
NOTE: You should always use the Intel RAID driver, even though the OS states that its driver is newer
7. The next screen will ask again if you want to specify additional adaptors. Press Enter to
continue setup
8. At the Welcome to Setup screen press Enter to set up Windows
9. Press F8 to accept the license agreement
NOTE: You need to customize and create two partitions, one for system drive C: (at least 25 GB) and a
second partition for data. The second partition should be created after the OS installation is complete.
10. When prompted, create a partition on the system drive by pressing <C>
11. Specify the new size in the Create Partition of size (in MB): (For 25 GB, you can
calculate by 25 * 1024 = 25600 MB). Enter this number 25600 for the new size
12. Press Enter to create partition
- 28 -