Adjust the chain slack.
Loose the lock bolts (4 pcs) then adjust the drive chain
slack by turn the adjusting nut.
Tighten the four lock bolts.
When the drive chain becomes very dirty, it should be
removed, cleaned and lubricated by specify lubricator.
Using commercial chain lubricant to lubricate the drive
chain.
Clean the drive chain with kerosene and wipe it dry.
Inspect the drive chain for possible wear or damage.
R eplace the chain, if it is worn excessively or damaged.
Inspect the sprocket teeth, if it is excessive wear
o
r damage, replace it.
Inspect the chain-tensioned roller.
R eplace it, if necessary.
2.10 BRAKE SYSTEM
Inspect the front brake lever and cable for excessive
play or other damage.
Replace or repair if necessary.
Measure the free play of the brake lever at the end of the
The standard of free play is 15-25 mm.
b
rake lever.
(For RXL50 / 90 / RXL90R, the ATV RXL50M doesn't have
t he front brake lever. )
9